MAPLUS WAX BP10 –3°/+9°C YELLOW SOLID

BP10 YELLOW
Packaging format
- Code MW0302 - 100gr
- Code MW0312 - 250gr
- Code MW0322 - 1kg
All snow types
–3°/+9°C
< 50%
120°/130°C
DESCRIPTION

Solid paraffin for training and sports use. To be used for snow from -3° to +9°C. It is an excellent base product for saturating race bases. For competition use it should be used with air humidity < 50%. Hot application with a waxing iron.
APPLICATION METHODOLOGY

GENERAL PRINCIPLES

The application of hydrocarbon paraffins (Racing Base or BP10), fluorinated hydrocarbon paraffins (LP15, LP2 or HP3) and perfluorinated waxes FP4 allows for certain overlaps based on the following chemical affinities:
Hydrocarbon paraffin alone or mixed with other hydrocarbon paraffins;
Fluorinated hydrocarbon paraffin alone or mixed with other hydrocarbon paraffins;
Perfluorinated wax FP4 alone or mixed with other perfluorinated waxes but in any case superimposed on a fluorinated or high fluorinated hydrocarbon paraffin (LP2 or HP3).
The direction in waxing operations must always be from the tip to the tail of the tool.

Race waxing can be done hot or cold depending on the physical state of the products and the experience of the skiman.

APPLICATION METHOD WITH WAXING IRON

- Rub the paraffin lump all over the base, leaving an even layer of product.
- Using the waxing iron at a temperature of 120°C., melt the wax in a regular forward and backward motion and then make a continuous pass from tip to tail at a constant speed (approx. 5 cm per second).
- Wait at least 15 minutes to allow the wax to solidify and the base to cool;
- Remove excess wax with a well-sharpened Plexiglas spatula, exerting little pressure;
- Remove the solidified paraffin from the side of the ski and the side of the edges;
- Free the impression with a stiff nylon hand brush
- Brush the impression with a manual or rotating stiff horsehair brush;
- Polish the impression with hand brush or rotating soft nylon brush.