MAPLUS WAX BP1 COLD - LIQUIDA

BP1 COLD
Packaging format
- Code MW0830 - 75ml
- Code MW0833 - 150ml
- Code MW0836 - 0.5lt
For all types of snow
-22°/-8°C
<40%
DESCRIPTION

Liquid paraffin for training and sport use in all types of snow from -22° to -8°C. For competitive use should be used with air humidity <40%. Recommended cold application with cork pad and brush.
APPLICATION METHODOLOGY

GENERAL PRINCIPLES

The application of hydrocarbon paraffins (Med or Soft Racing Base or BP1), fluorinated hydrocarbon paraffins (LP2 or HP3) and perfluorinated waxes FP4 allows certain overlaps based on the following chemical affinities:
Hydrocarbon paraffin alone (Med or Soft Racing Base or BP1) or mixed with other hydrocarbon paraffins;
Fluorinated hydrocarbon paraffin alone (LP2 or HP3) or mixed with other hydrocarbon paraffins;
Perfluorinated wax FP4 on its own or mixed with other perfluorinated waxes but in any case superimposed on fluorinated hydrocarbon paraffin (LP2 or HP3) .
The direction in waxing operations must always be from the tip to the tail of the tool.
Race waxing can be carried out hot or cold depending on the physical state of the products and the experience of the skiman.

COLD APPLICATION METHOD WITH CORK PAD AND BRUSH

- Spread the wax on the base for approximately 15 cm with a brush or drip;
- Let the wax penetrate into the delivery area while still liquid by rubbing and pressing with a manual cork pad and repeat the operation along the entire base (cork/brush MT0111 is useful);
- Wait at least 15 minutes to allow the wax to solidify;
- Free the side of the ski and the side of the edges from the solidified wax with the plexy spatula;
- Brush the base forwards and backwards by applying pressure with a stiff nylon hand brush;
- Brush the impression with manual or rotating stiff horsehair brush;
- Polish the impression with hand brush or rotating soft nylon brush.