GM BASE SOLID COLD
Packaging format
- Code MFF0160 - 50 gr
- Code MFF0170 - 250 gr
- Code MFF0180 - 1 Kg
For all types of snow
-22° / -8°C
30 / 80%
150°C
DESCRIPTION
Fluorine-free solid base for competition use. For all types of snow, new and processed, artificial and natural, with snow temperatures from -22°C to -8°C. Humidity from 30% to 80%. Hot application with a waxing iron at 150°C. Together with GM Gel Base, it is the ideal base for applying GM BOOST powder or liquid accelerators.
APPLICATION
HOT APPLICATION WITH WAXING IRON
1. Drip the block of product onto the base for 20 cm by placing it in contact with the base of the waxing iron set to the temperature indicated for each specific product and then immediately spread the wax with a regular back and forth movement (from tip to tail);
2.Repeat the operation for the entire base and finally perform a continuous passage from tip to tail (about 4/5 cm per second for GM Base Cold and Med, about 3 cm per second for GM Base Hot);
3.(mix with a hardener) If the snow conditions require the use of a harder base, on top of the freshly hardened GM Base place some ARTIC BASE powder (the greater the abrasion of the snow, the greater the quantity of powder) and with the waxing iron at 150°C perform a continuous passage from tip to tail at low speed (about 3 cm per second) perfectly melting the powder in the underlying solid paraffin.
4.Free the side of the ski and the side of the edges from the solidified product with a well-sharpened plexyglass to remove the powd
5.Wait at least 15 minutes to allow the base to cool and the product to solidify; then remove excess solidified product with a sharp spatula by applying gentle pressure;
6.Clear the base structure using a stiff steel hand brush;
7.Brush the base with a manual or rotating stiff brass brush;8.Brush the insole with a manual or rotating stiff horsehair brush;9.Polish the insole with a manual or rotating soft nylon brush.
